Only downside to that is the appearance, they don't look the same as the OEM bolts.
-
Don't overlook our Welcome Package, it contains many links to important and helpful information about functions at VHT like posting pictures and sending PMs (private messages), as well as finding the parts you need.
AD
Prototype CL350 Build
- Thread starter VintageHondaGarage
- Start date
For their sizing (increments of 5's on the lengths), Bolt Depot works well when you've got enough volume to justify the shipping (although the 13mm head size on their M8's instead of Honda's typical 12 does annoy me sometimes). I've found the Auto part workaround as the best solution to the "pick 2" dilemma of the Correct/Cheap/Fast decision tree.
VintageHondaGarage
Well-known Member
Bolt Depot does offer JIS sizing with the 12mm heads. I’m just not that big of a stickler and none of my builds are 100% factory stuff
VintageHondaGarage
Well-known Member
It’s impressive what you can get done in just a few hours of work
VintageHondaGarage
Well-known Member
I’m not a huge fan of the zip tie look when it comes to keeping wires organized, especially on visible items.
Case in point: aftermarket controls on an aftermarket set of bars. While I could drill the proper holes and run the wires through the bars like they did at the factory, I thought I would shake things up a bit and try something different.
Case in point: aftermarket controls on an aftermarket set of bars. While I could drill the proper holes and run the wires through the bars like they did at the factory, I thought I would shake things up a bit and try something different.
I'm not a fan of zip ties either, I only use them in areas not seen or barely seen. I prefer original Honda cable ties, but those are interesting and look much better when factory options are NLA.