cb350

Ran across an estate sale with some parts in it on my search for a barn find! Sorry for the short notice, hope this helps someone! Estate Sale: https://craiglytleauctions.hibid.com/catalog/630192 Honda Parts Listed: Lot # : 7 - Assorted Honda clutch and throttle cables -...

Rebuilding a 1968 CB350 K0 and thought I had found the perfect used OEM seat on eBay; it appeared correct and in excellent condition. However upon fitting it to the bike, I realized it does not fit the CB350, it's longer than the stock seat, the rubber cushion spacing is off, the support strut...

Hello, I have a good one for ya'll that I can't quite wrap my head around. I have a '72 CB350K4. I came home from an 80mi ride (with zero clutch or shifting issues) but once parked found I had a relatively large oil leak that was coating the underside of the bike (oil was still on the dipstick...

I am replacing my 1969 Honda CB350 tires and tubes and went ahead and bought everything before taking the old tires off. I noticed that the original tube for the rear tire says 3.50-18 // 4.00-18 but the tube I bought is 3.25/3.50-18. The label on the new tire shows tube type as “3.50-18”...

Looking for a chrome luggage rack for my '72 CB350. I really like the round bar chrome type, not the square bar one you can pretty easily find on Ebay. Would like one similar to this picture but doesn't need to be this exact one, I've seen some with the rear of it curved up which I think is...

Unfortunately I am having to sell my motorcycle due to some health issues. While I would like to keep it, I would hate to see it just sit and collect dust. So it is a 1968 CB350 I bought three years ago from the third owner/collector. It seems to be all original from the knowledge I have and...

I've been working on this '72 CB350, finally got the engine put back together, got all the cables run and put the shifter on, aaaaannnnnd, it's stuck in gear. I can't get it to shift. at all. Any ideas?

*This started as more of a question thread but became more of a rundown of my charging system because I think I got a better grasp on the problem as I troubleshooted. Suggestions are still appreciated though! So my CB350, which is properly tuned besides the jetting running a little rich, has...

Hello. In need of some help diagnosing my bikes issues maintaining idle during rides. Initial startup is normal (relative to my bike) but after riding it'll die if I'm not giving a little bit of throttle constantly. Then, when I tried to limp it home, after starting it I can't accelerate or...

Hello. I'm searching for knowledge of this piece used to stabilize the exhaust pipe in the engine block. Where can I find replacements? What are the ramifications of not having a set of them on one side? Can I move one of these halves from one side to the other in the mean-time? Picture:

So I bought a regulator/rectifier from 4into1 for my '72 CB350 and when I plugged it up I noticed that the wire colors do not match up to the wiring harness. The green from the regulator/rectifier lines up to the red wire? I can only think of two possibilities: The wires came reversed and I...

I have a '72 CB350 and looking to order a new regulator rectifier. Specifically the one from 4 into 1 pictured below. I have noticed that on some others they have an additional black wire instead of a ground wire like in the picture. My question is if there is a difference between these...

Hi everyone. Selling two parts bikes. Classic story....bought these together as rollers with big resto ideas....I ended up doing a resto on a Yamaha XS instead and realize that I'm never going to do anything with these and would love to see them go to a good home. I broke them down, labeled...

Two of my friends reached out to me in November 2019 about an old Honda in the wife's parents' shed. They sent a couple of pictures of what looked like a CB350, buried amidtst a wide array of items one typically finds in a shed forty years after move-in. Fast forward two and a half years to...

My CB350 from 1971 recently purchased. How gorgeous!

Hi All ! I've made decent progress rebuilding my CB350 engine and aside from not having all matching nuts and bolts, thought I was nearing the finish line. That is until last night when I realized my timing advancer was missing the actual cam. Anyone happen to have just the cam or the complete...

Hello all! I posted a very similar thread to this one on the old forum, but I've heard good things about this forum and just got accepted, so I figured I'd see what this community has to say about my problems. I read a similar thread regarding this, however, I have a different model/engine and...

Hello! I've been working on a 1970 CB350 that is my father-in-laws. He told me that he got some head work done previously and that he is suspecting that it was done incorrectly. I validate this by trying to install the head and having zero valve clearance, couldn't get the side covers on with...

Hi I just installed some clubmans on my ‘70 cb350 but didn’t reroute the throttle cable as it looked fine at the time but now when I turn the handlebars to the left for a sharp turn or u turn and the engine cuts out (sometimes it doesn’t during testing). Sometimes it bogs and the rpms drop...

I just got my bike restored by a shop and only got to ride it for about 2 hours total over the course of a week and went to take photos of it and used the headlight on some of the photos but was only like a 20 minute shoot. Afterwards, I had 0% electricals and accessories would t work, no...

Bring A Trailer auction Nice looking 1970 CB350 that I'd think of buying if I was closer! From the auction listing:

I bought it for $600 non-running with a clean title in 2018. I got it running with help from the old site and rode it around for two years and had a blast. It's pretty beat up with its 25,000 miles but it still was pretty decent in the city. I installed the pamco ignition and got it running...

THE KID'S CAFÉ - A 16 Year Olds (Now 18) First Rebuild (Project Log CB350 - 1971) Long time no see VHT members. This thread will be a continuation of the original on the old website. If you would like to catch up here is the link. So lets get up to date. The virus has put somewhat of a stall...

I've been on and off working on rebuilding a 1972 CB350K motor. Just got the motor shell and pistons back from being cleaned and vapour blasted. Will have to replace the exhaust valves (unexpected) and piston rings (expected). I've ordered the piston rings, asking for standard rings (ie 64mm -...

(Sorry if this isn't the right location for this thread but I'm guessing it's a carb related problem) Hey All, I have been working on a K3 350 for the last year and feel like I'm REALLY close to having it in a place where I would feel comfortable driving it around town regularly. (AKA: I've...