-
Don't overlook our Welcome Package, it contains many links to important and helpful information about functions at VHT like posting pictures and sending PMs (private messages), as well as finding the parts you need.
AD
Front forks CA95
- Thread starter Pop
- Start date
ballbearian
Veteran Member
Not that I know of. Would be a lot of trouble and probably lose the stock front fender.
crazypj
Veteran Member
- Joined
- Jun 5, 2020
- Total Posts
- 1,580
- Total likes
- 1,027
You could probably fit complete front end off just about anything around the same weight.
Most likely CB350/360/350F/400F would be straight swap and you can probably use original front wheel with new spacers.
Have your forks rotted out?
Most likely CB350/360/350F/400F would be straight swap and you can probably use original front wheel with new spacers.
Have your forks rotted out?
ballbearian
Veteran Member
You could add an external set of quad shocks forward of the hollow forks like the Japanese BOBL racers.
Hi thanks for the info I will look into that .
The forks in the bike are slightly bent on one side but bike isn’t standard, rear mug guard has been cut off at sometime, different tank , different front mud guard , handle bars . It came in a box so was just going to make it a bit different. Thanks Chris