Richard Pitman
Veteran Member
Any hints and tips ? The factory manual is somewhat vague.
I don't have a problem getting the rotor off, big bolt and big electric rattle gun pops that off easily. I think that the challenge will come when I try to remove the three countersunk screws. Battery powered impact driver may help with those, the bigger tool would just rip the heads off.
Once that is off, I seem to recall reading that it is easy to lose the springs, perhaps place the assembly in a high sided washing up bowl to catch any stray parts ?
I don't have a problem getting the rotor off, big bolt and big electric rattle gun pops that off easily. I think that the challenge will come when I try to remove the three countersunk screws. Battery powered impact driver may help with those, the bigger tool would just rip the heads off.
Once that is off, I seem to recall reading that it is easy to lose the springs, perhaps place the assembly in a high sided washing up bowl to catch any stray parts ?