• Don't overlook our Welcome Package, it contains many links to important and helpful information about functions at VHT like posting pictures and sending PMs (private messages), as well as finding the parts you need.

    AD

CB/CL160ish Parts - Name your price

rocky

Member
Joined
Jun 8, 2021
Total Posts
37
Total likes
20
Location
Washington, DC, USA
Hi, just have a few things if people need them.

Taken - CB160 Engine - unknown if running, came with my "CB160" motorcycle that was being converted into a CL160. The CL160 engine currently in there works so I don't have a need for the extra. It has an electric motor that was removed, also ignition plate and points/cover, I think I have.

CL160 handlebars I think but do not have any holes in handlebars for wires.

CL160 exhaust - rough condition, pipes seem dirty/rusty but okay, previous owner looks to have used some hi-temp epoxy or something around the silicenser area. Probably best for someone to use for a custom exhaust.

Taken - CL160 foot rest and side stand

Interest but not taken - Non-functioning speedo

CB160 headers, badly rusted but no holes

CB160 electric start solenoid

Rear luggage rack, that was told fits but unless I'm missing something, does not fit a CB160.

See photo for parts, in the DC area and will be in Hampton roads over Thanksgiving if anyone would like this stuff.

Thanks

IMG_4810.jpeg
 
Last edited:
Yes willing to ship but no idea what the shipping cost would be. Would use probably USPS flat rate box I guess unless you had a preferred method. Let me know if you have any questions, I can take more pictures of the speedo and electric motor if you'd like.
 
Hi Rocky. I don't know if storage is your problem but, since I'm in Hagerstown, I'd be glad to be a repository for orphan parts, if I ever, "go down the road" to the DC area.
Actually, could probably use the motor mostly for it's crank eventually. If it's not spoken for.
 
rocky said:
Yes willing to ship but no idea what the shipping cost would be. Would use probably USPS flat rate box I guess unless you had a preferred method. Let me know if you have any questions, I can take more pictures of the speedo and electric motor if you'd like.
Click to expand...
My ZIP is 90045- USPS would totally be fine. I'd love to get a shot of the face and back of the speedo, and as long as the starter motor is complete that's all I'm concerned with.
 
Thanks for the interest in the parts. Engine and footpeg/side stand are called for. Will provide some more photos this weekend the speedo and electric motor.

@ballbearian may have to take you up on that offer if Alan F. doesn't grab the engine in the spring.
 
The CL footpegs won't allow the CB headers.

I wonder if the rack is for a CA160, which also should fit a CA95 Benly. I have a Benly rack and could take measurements.
 
ballbearian said:
The CL footpegs won't allow the CB headers.

I wonder if the rack is for a CA160, which also should fit a CA95 Benly. I have a Benly rack and could take measurements.
Click to expand...
I didn't remember that the CL footpegs won't work with CB pipes, i guess that ends my interest in your CL pegs/sidestand, sorry.

My CB160 arrived with a rack in good condition if anyone needs one I can list it in this section.
 
ballbearian said:
The CL footpegs won't allow the CB headers.

I wonder if the rack is for a CA160, which also should fit a CA95 Benly. I have a Benly rack and could take measurements.
Click to expand...

I did a couple measurements, the wider part that I assume bolts to the frame or some seat bolts is 9.5" while the more narrow part is 4.25" wide, assuming that would affix to somewhere near the fender or rear light.
 
rocky said:
I did a couple measurements, the wider part that I assume bolts to the frame or some seat bolts is 9.5" while the more narrow part is 4.25" wide, assuming that would affix to somewhere near the fender or rear light.
Click to expand...
Yes the forked ears go on the skock studs and that 9.5" seems about right when I look at my CB160.
The rack that was mounted on my friend's CA95 Benly is narrower at 8.75" and 5 3/16" between the rear bracket holes. Also the distance between centers from front ears to back brackets is 5.75".
 
rocky said:
Here's a few more photos of the speedo.
Click to expand...
Thanks for the pics- I'll probably pass on the speedo as it's in about the same condition as the one I have.

Not sure if you'd be willing to sell the metal speedo bracket separately? (I'm missing that piece and the foam...)

I'm still interested in the starter as well, but waiting to hear back from a buddy as he might have an extra for me- so if you've got other interested parties I understand.
 
You must log in or register to reply here.
Back
Top Bottom